KMT - GmbH
  Startseite »
   Kategorien
Automotive
Messverstärker
Robuste Meßdatenrekorder
Software
Telemetriesysteme
PDFs
    Informationen
Worldwide
Impressum
Referencen
Messen
Company
Kontakt
    Sprachen
English Deutsch
R16-PCM-Rotate Telemetrie - NEU!!
R16-PCM-Rotate Fast, simple assembly and trouble free wireless data transmission with the new axial 16-channel 16bit telemetry system for strain gages The new R16-PCM-Rotate is a rugged, waterproof axial unit for collecting dynamic measurements from rotating devices under shock and vibration loads like railway wheels, gear boxes, test rigs or other axial applications. T

R16-PCM-Rotate

Fast, simple assembly and trouble free wireless data
transmission with the new axial 16-channel
16bit telemetry system for strain gages

R16-PCM telemetry system SET


The new R16-PCM-Rotate is a rugged, waterproof axial unit for collecting dynamic measurements from rotating devices under shock and vibration loads like railway wheels, gear boxes, test rigs or other axial applications. It enables conditioning, digitization and wireless transmission of up to 16 parallel strain gage (STG) signals. Signal and power transfer is contactless, data being transmitted optically and power inductively. No batteries and no routine maintenance! The fully sealed environmental housing and extended operating temperature range make it particularly suitable for off-road and winter testing in arduous conditions.

On the rotating side the strain gage signals are conditioned and amplified. The analog strain gage signals are converted into a 16 bit digital format. Data transmission from the rotating to the stationary side is achieved by an infrared telemetry link along the centerline of the axis for a serial bit stream. The power for the rotating amplifiers sensor excitation and signal conditioning is supplied via induction. This ensures uninterrupted continuous power supply. The rotating strain gage amplifiers are software programmable via web interface. The settings are gain, auto-zero and type of strain gauge.

On the stationary side the digital output is connected to the decoder unit via a standard data cable. The decoder unit converts and de-multiplexes the serial bit stream into a parallel format. This parallel signal along with address and clock information is converted to 16 each analog signals (+/-10V) and made available on a Sub-D connector on the decoder unit. Optional is an IP-LAN interface for digital transfer of data’s into the PC available.

R16-PCM - Technical Data:

R16-PCM-ENC-Telemetry

  R16-PCM-DEC-Telemetry-Frontside            R16-PCM-DEC-Telemetry-Rearside

             Front side                                Rear side

Encoder (Rotor Electronic)

Decoder / IND-PWR

Number of channels:

16

Number of channels:

16

Sensor support

Strain gages full and half bridge ≥ 350Ω

Analog Output

+/-10V via 37-Sub-D connector

Excitation

4V for all channels

Digital Output

PCM serial (optional PCM interface
 for PC)

Gain

125-250-500-1000-2000
(selectable by software)

 

 

Offset calibration

Automatically (Auto Zero)

 

 

Anti-aliasing filter

5-pole Butterworth and

2-stages digital down sampling filter

 

 

Band width

3000 Hz per channel

Band width

3000 Hz per channel

Sampling rate

9500 Hz per channel

 

6000 Hz on request!

Resolution

16 bit ADC

DAC (digital to analog converting)

16 bit

Powering

Inductive

Powering

10-30V, 50 Watt (e.g. 24V 2A)

Data transmission

PCM digital infrared link

Data receiving

PCM digital twisted pair

Operating temperatures

-30 … 80°C

Operating temperatures

-20 … 70°C

RPM

Max. 3600

 

 

Dimensions

100 diameter, 110 Lengths (mm)

Dimensions

2x 205 x 105 x 120 (mm)

Weight

1250 gram

Weight

1050 gram

Housing protection type

IP65

Housing protection type

IP54

Housing material

Aluminum anodized

Housing material

Aluminum anodized

Humidity 

20…100%

Humidity 

20 ... 80% (not condensing)

Shock

1000g

Shock

100g

Vibration

+/- 10g

Vibration

5g

Power/Data cable

Length up to 50m, 5m is standard
(between Encoder /Decoder)

System accuracy

±0.25% (without sensor)

Application on gearbox
R16-PCM Telemetry on gearbox

 
Datenblatt PDF       Bedienungsanleitung PDF       Anwendungsbeispiele PDF 


Copyright © 2011 KMT - Messtechnik & Telemetrie, Telemetry - KMT Telemetry solutions for Telemetrie
Design by Kerndl IT Service
Powered by osCommerce