KMT - GmbH
  Startseite »
   Kategorien
Automotive
Messverstärker
Robuste Meßdatenrekorder
Software
Telemetriesysteme
PDFs
    Informationen
Worldwide
Impressum
Referencen
Messen
Company
Kontakt
    Sprachen
English Deutsch
CT16 Compact Telemetrie
The CT16 Compact is a 16-channel telemetry system with integrated signal conditioning for sensors, wireless digital transmission and analog reproduction. The conditioned measured values are routed via anti-aliasing filter to a 12-bit A/D converter, simulate sampling of all channels, encoded in PCM format and transferred to the HF transmitter as modulation variables. Dynamic range is 72dB with a signal-to-noise ratio of approximately 70dB. Different carrier frequencies available with the Various configurations of different sensor modules are possible like signal conditioning for strain gages (STG), thermocouples type K (Th-K), thermo sensors Pt100, ICP sensors, potentiometer sensors (POT) and also Voltage inputs (+/-5 or +/-10V). Mixed configuration available

CT16 Compact Telemetry
16- channel telemetry system Including signal conditioning for strain gage, thermo couples, Pt100, ICP, POT and high-level inputs
!



CT16-ENCODER and DECODER



CT16-ENCODER

·        12 bit resolution, !

·        Anti aliasing filters!

·        Simultaneous sampling of all channels

·        Signal bandwidth 16 x 0 ... 45Hz (40kbit)!

·        Signal bandwidth 16 x 0 ... 1500Hz (1280kbit)

·        Distance up to 500m (only 40kbit)

The CT16 Compact is a 16-channel telemetry system with integrated signal conditioning for sensors, wireless digital transmission and analog reproduction.
The conditioned measured values are routed via anti-aliasing filter to a 12-bit A/D converter, simulate sampling of all channels, encoded in PCM format and transferred to the HF transmitter as modulation variables. Dynamic range is 72dB with a signal-to-noise ratio of approximately 70dB. Different carrier frequencies available with the Various configurations of different sensor modules are possible like signal conditioning for strain gages (STG), thermocouples type K (Th-K), thermo sensors Pt100, ICP sensors, potentiometer sensors (POT) and also Voltage inputs (+/-5 or +/-10V). Mixed configuration available.


 
Datenblatt PDF       Bedienungsanleitung PDF       Anwendungsbeispiele PDF 


Copyright © 2012 KMT - Messtechnik & Telemetrie, Telemetry - KMT Telemetry solutions for Telemetrie
Design by Kerndl IT Service
Powered by osCommerce