|
Kategorien |
 |
|
| |
Informationen |
|
|
|
|
| |
Languages |
|
|
|
|
|
|
|
| |
|
|
| |
Products |
 |
1) Function Description of Digital PCM Telemetry
|
1. Digital Telemetry Systems
1.1 Telemetry Systems with PCM-Technology
For the wireless transmission of several information channels, several different
RF transmission frequencies are necessary and as many selective RF receivers,
which would increase the cost/benefit ratio disproportionately. The solution of
this problem provides the digital transmission technique. The real task of
multi-channel telemetry systems is
to
interlace and bundle the Mehr>>>
|
|
 |
2) Rotating Telemetry Synopsis List
|
Synopsis of KMT rotating digital telemetry systems
Synopsis of KMT rotating digital telemetry systems:
TEL1-PCM-IND
TEL1-PCM-BATT
TEL1-PCM-HS-BATT
MT1-PCM
MT32-PCM
A/D
Mehr>>>
|
|
 |
CT16 Compact Telemetry
| The CT16 Compact is a 16-channel telemetry system with integrated signal conditioning for sensors, wireless digital transmission and analog reproduction.
The conditioned measured values are routed via anti-aliasing filter to a 12-bit A/D converter, simulate sampling of all channels, encoded in PCM format and transferred to the HF transmitter as modulation variables. Dynamic range is 72dB with a signal-to-noise ratio of approximately 70dB. Different carrier frequencies available with the Variou Mehr>>>
|
|
 |
CT16 Rotate Telemetry
|
Telemetry system for rotating Applications, Direct sensor connection for STG, TH K, ICP and High level inputs (+/-5V or +/-10V), Signal bandwidth 16 x 0...375Hz with 320kbit, Distance up to 250m between transmitter and receiver, Integrated Battery for up to 12 hours operating time, Waterproofed housing (IP65)
.style1 {
color: #FFFFFF;
border-width: 1px;
background-color: #008000;
}
.style2 {
text-align: left;
}
.style3 {
line-height: 115%;
font-size: 11.0pt;
font-fam Mehr>>>
|
|
 |
CT2-Mini Telemetry
| Small Telemetry System with 2 channels, direct Sensor connection · 2 channels, 12 bit resolution, simultaneous sampling of all channels · Anti aliasing filters · Direct sensor connection for STG, Thermo couples K or high level inputs · +/- 5V analogue output at the receiver side, optional dig. output for PC interface · Distance up to 500m between transmitter and receiver · Static acceleration up to 100 g in all directions · Signal bandwidth 2 x 0-375Hz with 40kbit transmitter
Mehr>>>
|
|
 |
CT2-Wheel Telemetry - NEW!!
| 2-Channel wheel telemetry system for connection with strain gages, force, temperature and vibration sensors as well as high level input +/-5 or +/-10Volts. · 4 different carrier frequencies (433.3, 433.7, 434.1 or 434.5 MHz) enable measurements at 4 Wheels for one car. · A mixed installation of different signal conditioning modules possible. · Universal mounting adapter enables a fast and exactly montage on different kind of wheels. · The transmitting system is dust
CT2-Whee Mehr>>>
|
|
 |
CT4/8-Wheel Telemetry
| 4 (8) Channel wheel telemetry system for connection with strain gages, force, temperature and vibration sensors as well as high level input +/-5 or +/-10Volts. · 4 different carrier frequencies (433.3, 433.7, 434.1 or 434.5 MHz) enable measurements at 4 Wheels for one car. · A mixed installation of different signal conditioning modules possible. · Universal mounting adapter enables a fast and exactly montage on different kind of wheels. · The transmitting system is dust and water protected (IP65 Mehr>>>
|
|
 |
CT8 Compact Telemetry
| with 8 channels, direct Sensor connection · 8 channels, 12 bit resolution, simultaneous sampling of all channels · Anti aliasing filters · Direct sensor connection for STG, Thermo couples K or high level inputs · +/- 5V analogue output at the receiver side, optional dig. output for PC interface · Distance up to 500m between transmitter and receiver · Static acceleration up to 100 g in all directions · Signal bandwidth 8 x 0-95 Hz with 40kbit transmitter, 8 x 0-750 Hz with 320kbit transmitter
Mehr>>>
|
|
 |
CT8 Rotate Telemetry
| Telemetry system for rotating Applications, Direct sensor connection for STG, TH K, ICP and High level inputs (+/-5V or +/-10V), Signal bandwidth 8 x 0...95Hz with 40kbit tx or 8x 0...750Hz with 320kbit tx, Distance up to 250m between transmitter and receiver, Integrated Battery for up to 6 hours operating time, Waterproofed housing (IP65)
CT8-Rotate
Telemetry system for rotating Applications!
CT8-Rotat Mehr>>>
|
|
 |
MT1-PCM Telemetry
|
Digital one channel
radio telemetry system for strain gage applications on rotating shafts,
“Controlled Gain and AZ at receiver side” Signal
bandwidth up to 500Hz, Distance <-> transmitting to
receiving antenna 1-10 meter, Powering transmitting side: 6-9V Litium
battery
MT1-PCM
Digital Radio Telemetry System for Strain Gage
Applications on Rotating Shafts
“Gain and Auto Zero setting direct from Receiv Mehr>>>
|
|
 |
MT32 Modular Telemetry for rotating applications
| MT32 Modular Telemetry is a very small and flexible telemetry system for rotating, mobile and stationary applications. Each sensor module is equipped with signal conditioning, anti-aliasing filters, analog-to-digital converters and a digital output. All these up to 32 modules will controlled by an encoder (multiplexer with PCM output) module. By this concept it’s possible to install the acquisition modules close to the sensor to have short connections for the analog sensor lines. This avoids an Mehr>>>
|
|
 |
R16-PCM-Rotate Telemetry - NEW!!
|
R16-PCM-Rotate
Fast, simple assembly and trouble free wireless data transmission with the new axial 16-channel 16bit telemetry system for strain gages
The new R16-PCM-Rotate is a rugged, waterproof axial unit for collecting dynamic measurements from rotating devices under shock and vibration loads like railway wheels, gear boxes, test rigs or other axial applications.
.style1 {
text-align: center;
font-size: large;
font-family: Arial, sans-serif;
color: #FFFFFF;
fo Mehr>>>
|
|
 |
TEL1-PCM Torque Telemetry New!!
| Digital one channel telemetry system for strain gage applications on rotating shafts “Controlled Gain and AZ at receiver side” ,Signal bandwidth up to 1200Hz (-3dB),Distance transmitting coil to receiving head 25mm (Optional 35mm),Powering transmitting side : Inductive
TEL1-PCM-IND
Digital telemetry system for strain gage applications on rotating shafts
“Controlled Gain and AZ at receiver side” !
Mehr>>>
|
|
 |
TEL1-PCM-BATT Torque Telemetry
| Digital one channel telemetry system (transmitter battery-powered) for strain gage applications on rotating shafts “Controlled Gain and AZ at receiver side” ,Signal bandwidth up to 1200Hz (-3dB),Distance transmitting coil to receiving head 150 mm, Powering via battery 6-9V
TEL1-PCM-BATT
Digital telemetry system for
strain gage applications on rotating shafts
(transmitter battery-powered)
Mehr>>>
|
|
 |
TEL1-PCM-HS High Speed Telemetry
| Digital one channel "HIGH SPEED" (50kHz) telemetry system for strain gage and ICP applications on rotating shafts “Controlled Gain and AZ at receiver side” Signal bandwidth up to 50,000, Distance transmitting coil to receiving head 20 mm (Optional35mm), Powering transmitting side : Inductive, Auto-Zero adjustment, Gain: 250-500-1000-2000-4000-8000, No influence through radio frequency, Digital transmission via magnetic field.
TEL1-PCM-HS-BATT
Digital High Speed (50kH Mehr>>>
|
|
 |
TEL1/40k TTL Telemetry
| TEL1/40k TTL
1 Channel TTL Telemetry. Transfer TTL pulses from 4 - 40000 TTL Impulsen/s
4 ... 40000 TTL Impulses/s
Range 300-500 m
4 Telemetry systems can work at the same time with different carrier frequencies
(433.3, 433.7, 434,1 und 434.5 MHz)
Powering 10-30 V DC
TEL1/40k TTL
1 Channel TTL Telemetry. Transfer TTL pulses from 4 - 40000 TTL Impulsen/s!
Mehr>>>
|
|
 |
TEMPTEL8 Telemetry - NEW!!
| Small 4 or 8 channel Telemetry for Thermocouples K or J ·12 bit resolution, simultaneous sampling of all channels, Full galvanic isolated inputs, Cold junction compensation
TEMPTEL 4/8
4 or 8 channel Telemetry System for Thermocouples K or J
Inductive digital transmission from rotating shafts!
·
For thermo couples K or J !
Mehr>>>
|
|
 |
TEMPTEL8 Wheel Telemetry - NEW!!
| Small 8 channel Telemetry for Thermocouples K or J ·12 bit resolution, simultaneous sampling of all channels, Full galvanic isolated inputs, Cold junction compensation, Bandwidth 8x 0-30Hz, Output is linearised for K or J, +/- 10V analogue output at the receiver side, Distance up to 10m between transmitter and receiver, Static acceleration up to 200 g in all directions, Signal bandwidth, 2 x 0-375Hz with 40kbit transmitter
TEMPTEL8-Wheel
8 channel Telemetry Syst Mehr>>>
|
|
|
|
| | |
