KMT - GmbH
  Start page »
   Kategorien
Automotive
Mobile amplifier
Rugged data recorder
Software
Telemetry systems
PDFs
    Informationen
Worldwide
Impressum
References
Fair´s
About us
Contact
    Languages
English Deutsch
CT8 Compact Telemetry
with 8 channels, direct Sensor connection ˇ 8 channels, 12 bit resolution, simultaneous sampling of all channels ˇ Anti aliasing filters ˇ Direct sensor connection for STG, Thermo couples K or high level inputs ˇ +/- 5V analogue output at the receiver side, optional dig. output for PC interface ˇ Distance up to 500m between transmitter and receiver ˇ Static acceleration up to 100 g in all directions ˇ Signal bandwidth 8 x 0-95 Hz with 40kbit transmitter, 8 x 0-750 Hz with 320kbit transmitter

CT8
Compact Telemetry System with 8 channels, direct Sensor connection
!



ˇ 8 channels, 12 bit resolution, simultaneous sampling of all channels !

ˇ Direct sensor connection for STG, Thermo couples K or high level inputs !

ˇ Distance up to 500m between transmitter and receiver !

ˇ Signal bandwidth 8 x 0-95 Hz with 40kbit transmitter, 8 x 0-750 Hz with 320kbit transmitter !

ˇ Anti aliasing filters

ˇ +/- 5V analogue output at the receiver side, optional dig. output for PC interface

ˇ Static acceleration up to 100 g in all directions



Transmitter unit for 8 Channels



8 channel Decoder with receiving antenna

The CT8 compact is a 8-channel telemetry system with integrated signal conditioning for sensors, wireless digital transmission and analog reproduction.

The conditioned measured values are routed via anti-aliasing filter to a 12-bit A/D converter, simulate sampling of all channels, encoded in PCM format and transferred to the HF transmitter as modulation variables. Dynamic range is 72dB with a signal-to-noise ratio of approximately 70dB. Four different carrier frequencies available with the 40kbit transmitter ( 433.3 to 434.5 MHz range) and enable a signal bandwidth of 8 x.0-95 Hz. With the 320kbit/s transmitter only one carrier frequency available in the 433,9 MHz band and enable a signal bandwidth of 8 x 0-750 Hz.


Frequency table

Bit rate

8 CH.

4 CH.

2 CH.

320 kbit/s

0-750Hz

0-1500Hz

0-3000Hz

40 kbit/s

0-95Hz

0-190Hz

0-375Hz

Various configurations of different sensor modules are possible like signal conditioning for strain gages (STG), thermocouples type K (Th-K) and also Voltage inputs (+/-5 or +/-10V), mixed configuration available.

Specify at Order!!

 
Datasheet PDF       User manual PDF       Application samples PDF 


Copyright © 2011 KMT - Messtechnik & Telemetrie, Telemetry - KMT Telemetry solutions for Telemetrie
Design by Kerndl IT Service
Powered by osCommerce