KMT - GmbH
  Top » Catalog » Telemetry systems »
Categories
Automotive (12)
DAQ-Notebook (1)
Mobile amplifier (2)
Rugged data recorder (4)
Software (1)
Telemetry systems (18)
PDF (44)
Information
New products
References
Worldwide
Impressum
Fair’s
Links
About us
Contact
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Languages
English Deutsch
TEMPTEL8 Wheel Telemetry - NEW!!

Small 8 channel Telemetry for Thermocouples K or J ·12 bit resolution, simultaneous sampling of all channels, Full galvanic isolated inputs, Cold junction compensation, Bandwidth 8x 0-30Hz, Output is linearised for K or J, +/- 10V analogue output at the receiver side, Distance up to 10m between transmitter and receiver, Static acceleration up to 200 g in all directions, Signal bandwidth, 2 x 0-375Hz with 40kbit transmitter

TEMPTEL8-Wheel
8 channel Telemetry System for Thermocouples K or J

  • 8x Thermocouple inputs for K or J

  • Full galvanic isolated inputs

  • Signal bandwidth 8x 0-30Hz

  • Temperature range -50 to 1000°C

  • 12 bit ADC, simultaneous sampling

  • Output is linearized for K or J

  • Output analog +/- 10V (Opt. CAN-BUS)

  • 4 different carrier frequencies

  • Water protected Tx-housing (IP65)


Transmitter unit

Receiving unit for 8 Channels with antenna



TEMPTEL8-Wheel - SET

TEMPTEL8-Wheel is an small telemetry system designed for easy mounting onto rotating Wheels to provide non-contact transmission of temperature measurement.

Sensors inputs are connected via screw clamp. Measured values are prepared in analog format, digitized (12bit) and transmitted via radio frequencies. Four different carrier frequencies are provided, this allows up to four systems (e.g. for four wheels) to operate in parallel. The complete transmitter assembly is water protected to IP65 specifications.

The following thermocouples can be connected: Type K -50 to 1000°C or Type J -50 to 750°C.

All inputs are full galvanic isolated!

The measured values are processed and output as +/-10V analog signals (linearized for K or J) at the BNC sockets (Opt. CAN-BUS) on the stationary receiver located in a vehicle.

Resolution of 12 bits is standard; this enables an amplitude dynamic of 72 dB. The analog signal bandwidth is 0-30 Hz (-3dB) when configured as an eight channel. The measurement accuracy is +/-0.5 % (without sensor). The TEMPTEL8-Wheel is suited for operation at ambient temperatures of -20 to +70°C. The transmission distance between transmitter and receiving antenna is of the order of up to 10m (30 feet) - depend of application! 

More details down load PDF data sheet

For more information, please visit this products webpage.
Datasheet PDF User manual PDF Application samples PDF
Tell A Friend
 
Tell someone you know about this product.
News
Who's online?
There currently are
 6 guests
 online.


Tag cloud
small channel telemetry thermocouples resolution simultaneous sampling channels full galvanic isolated inputs cold junction compensation bandwidth 30hz output linearised analogue receiver side temptel system inductive digital transmission from rotating shafts thermo couples different temperature ranges linearization nbsp version analog current outputs 20ma signal powering encoder with battery transmitter unit receiving


Copyright © 2010 KMT - Messtechnik & Telemetrie, Telemetry - KMT Telemetry solutions for Telemetrie
Design by Kerndl IT Service
Powered by osCommerce